Insert Thermoshelves - Memmert VO Series Operating Manual

Putting into operation

4.3 Insert thermoshelves

Thermoshelves can only be operated on levels with a fitted flange socket in the rear
panel.
The device is equipped with mechanical locks to secure the thermoshelves. These can
be mounted on the support rails of the thermoshelves as required. The locking prevents
unintentional loosening of the thermoshelves from the flange socket.
NOTICE
►
When mounting the locking hooks, loosen a fixing screw on the support rail, which
may cause the rail to come out of the aligned position. When re-tightening the screw,
make sure that the thermoshelf can be inserted smoothly.
Mount the locking hook
1. Remove thermoshelf.
2. Release front screws on left and right, attach locking hooks and tighten slightly.
3. Check if thermoshelf can be inserted smoothly.
Secure thermoshelf
1. Slide the thermoshelf into contact with the rear panel.
2. Turn the locking hook upwards and press it back-
wards against the thermoshelf (Fig. 20).
3. Fasten Allen screws on both sides using an Allen
key size 3.
Remove thermoshelf
1. Loosen Allen screw with Allen key size 3 on both sides.
2. Turn the locking hook downwards (Fig. 21).
3. Pull the thermoshelf out of the flange socket.
28
Fig. 20 Thermoshelf locked
in place
Fig. 21 Thermoshelf lock
released
D39374 | Date 08/2018