Table of Contents
Advertisement
3.5 Setting up
Warning!
Stacked combinations of appliances can tip over due to their centre
of gravity and injure you or someone else. Always attach the appli-
ance to a wall with the tilt protection (see page 23). In case there
is not enough space, do not put the appliance into operation and do
not open the door. Contact the Memmert service (see page 2).
3.5.1 Preconditions
The installation site must be flat and horizontal and must be able to reliably bear the
weight of the appliance (see "Technical data" on page 16). Do not place the appliance
on a flammable surface.
A 230 V power connection must be available at the installation site.
The distance between the wall and the rear of the appliance must be at least 15 cm. The
clearance from the ceiling must not be less than 20 cm and the side clearance from walls
or nearby appliances must not be less than 5 cm (Fig. 13). Sufficient air circulation in the
vicinity of the appliance must be guaranteed at all times.
Fig. 13
Minimum clearance from walls and ceiling
D39374 | Date 08/2018
Delivery, transport and setting up
21
Hide quick links:
Advertisement
Table of Contents
