Maintenance and Troubleshooting Manual
3-9000-772 Rev B
3.5
Installing the shrouds
CUTTING HAZARD
Sharp edges may be present on the shrouds.
Wear appropriate personal protective equipment when working on the meter. Failure to do so may
cause serious injury.
Table 3-5 Shroud removal tool list
Tools required
Flat blade screw driver or 5/16 inch nut driver
Standard 1/2 inch socket or a standard 1/2 inch wrench
Standard 7/16 socket or standard 7/16 inch wrench
Standard flat blade screw driver
Appropriate personal protective equipment
Before starting shroud assembly check around the body OD to be sure the thermal wrap
completely covers the transducers and transducer cables.
Installing the shrouds
Section 3: Meter maintenance
January 2018
71