Maintenance and Troubleshooting Manual
3-9000-772 Rev B
When handling the Daniel supplied thermal insulation, refer to the manufacturer's product
Material Safety Data Sheet from the Cabot Corporation.
http://www.cabot-corp.com/Downloads/DL201205151104AM3693/
THERMAL INSULATION HANDLING CARE
Follow the hyperlink (above) for the manufacturer's thermal insulation safety precautions and
handling instructions.
Failure to do so may result in injury.
3.1.1
Removing the band shrouds
SURFACE TEMPERATURE HAZARD
Meter body and piping may be extremely cold. Warm the meter to
removal.
Wear personal protective equipment when coming in contact with the meter. Failure to do so may
result in injury.
CUTTING HAZARD
Sharp edges may be present on the band shrouds.
Wear appropriate personal protective equipment when working on the meter. Failure to do so may
cause serious injury.
Table 3-2 Shroud removal tool list
Tools required
Flat blade screw driver or 5/16 inch nut driver
Standard 1/2 inch socket or a standard 1/2 inch wrench
Standard 7/16 socket or standard 7/16 inch wrench
Standard flat blade screw driver
Appropriate personal protective equipment
Removing the band shrouds
Section 3: Meter maintenance
January 2018
0
C before attempting shroud
39