Process Data Allocation - WAGO I/O System 750 Quick Start Manual

2.2.3 Process Data Allocation

Start with point 3 while the Bluetooth
still open.
1. Click with the right mouse button on the Bluetooth
2. Choose Settings in the context menu. This opens a new window for the
3. In the navigation, choose the menu item PI Mapping.
The process data allocation is loaded from the module and graphically dis-
played in WAGO-I/O-CHECK.
4. Move the ruler for the first slave to the right so that the first slave is as-
Figure 8: PI mapping
5. Click on the [Write] button in the toolbar to write the altered configura-
6. Under navigation in the Operation Mode field, choose the real-time field
The example configuration is completed.
WAGO-I/O-SYSTEM 750
I/O Modules
configuration of the module.
signed the maximum possible number of bytes in the master's process im-
age (see Figure 8).
tion in the module.
using the [Communication (Realtime)] button.
Starting up the Bluetooth® Modules
®
configuration window (see Figure 8) is
®
Quick Start • 15
module (master)
g064465e