Configuration Of The Bluetooth; Master Using "Net Forming - WAGO I/O System 750 Quick Start Manual

2.2.2 Configuration of the Bluetooth

1. Start the WAGO-I/O-CHECK software (Version 3 or later).
2. Click on the button [Identify].
Your node configuration is graphically displayed.
3. Click with the right mouse button on the Bluetooth
4. Choose Settings in the context menu. This opens a new window for the
Attention
For the following, the Bluetooth
ration attempts have been attempted. If this is not the case, click on the [De-
fault], button to reset the module's configuration.
5. Click on [Data Frame] in the toolbar.
6. Enter (if not already set) a process image size of 48 bytes and a mailbox
Figure 7: Data structure
7. Click on the [Read] button in the toolbar to update the view of the con-
8. In the list on the right side, assign the role of master to the module by
9. Choose the menu item Net Forming in the navigation bar.
WAGO-I/O-SYSTEM 750
I/O Modules
would like to configure as a master.
configuration of the module.
size of 12 bytes (see Figure 7).
figuration in the module.
choosing "Master" under Device Role.
Starting up the Bluetooth® Modules
®

Master Using "Net Forming"

®
module must remain intact; i.e., no configu-
Quick Start • 13
®
module that you
g064444e