Kjellberg SmartFocus 300 Short Instruction Manual page 30

Safety instructions
Pos : 7.6 /Sicherheit/Warnschil d, Text @ 0\mod_1199715950375_19.doc x @ 2404 @ @ 1
Warning label
The warning label is visibly attached on the power source.
The operator and the maintenance personnel must familiarize themselves with the meaning of the symbols
before working at the unit.
Pos : 7.7 /Sicherheit/Warnschil d, Bild und Besc hrei bung @ 0\mod_1199716068148_19.doc x @ 2408 @ @ 1
5. Electric shock can kill! Live electrical parts may not be touched.
Opening the plasma unit may be carried out only by an advised electrician. Before carrying out any
maintenance or repair work the unit has to be disconnected visibly from the mains!
Wearing of protective clothing (helmet, welder's overall, leather apron, gauntlets, safety shoes).
The protective clothing has to be isolating, dry and heavily inflammable.
6. Working with plasma cutting systems possibly can lead to fire and explosions. Flammable and
explosive materials must therefore be kept away from the cutting area. It has to be ensured that suitable
and easily accessible extinguishing facilities are located nearby. The appropriate fire protection
regulations have to be taken into account.
7. Appropriate warning labels may not be removed, painted over or covered.
Pos : 7.8 /Steuer module--------------- Seitenumbruc h --------------- @ 0\mod_1197390577023_19.doc x @ 1454 @ @ 1
14
1. The operator and the maintenance personnel
must read and understand the instruction
manual as well as learning the operation of the
unit before work with it to avoid endangerments.
The safety regulations of the respective
company have to be taken into account.
2. Smoke, dust and gases developed during the
cutting process are harmful for health and may
not be breathed in.
Principally a suitable fume extraction device has
to be used.
3. Wearing of protective clothing (helmet, welder's
overall, leather apron, gauntlets, safety shoes).
The protective clothing has to be isolating, dry
and heavily inflammable
4. Noise can damage the hearing! During the
plasma cutting operation suitable ear protection
has to be used.
The radiation of the plasma arc can lead to eye
injuries and skin burns.
Eyes and skin have to be protected from the
radiation of the plasma arc therefore.
Protection devices are safety goggles and hand
shields, which must have a sufficient lens shade.