Kjellberg SmartFocus 300 Short Instruction Manual page 128

Plasma machine torch PerCut 2000/2000A / PerCut 4000/4000A
Pos : 21.22 /Brenner/PerCut2000/4000/Ans chl uss Plas mabrenner PerC ut4000 an PBA @ 13\mod_1413294508120_19.doc x @ 207932 @ @ 1
PerCut 4000/4000A
• Screw connections
- coolant return
- coolant supply
• electr. plug connections
- pilot cable
- control cable
- initial positioning contact
• Plug connector with sleeve nut for fluids
- control gas
Lead the plasma gas hoses and the swirl gas hoses through the corresponding openings of side wall on the
outside and connect them to the marked quick couplings
• Plug connector with sleeve nut for fluids
- plasma gas 1
ignition gas
- plasma gas 2
cutting gas
- swirl gas
- Exhaust
Unscrew the sleeve nut to this, clip the hose to the plug nipple and fasten the nut on thightly.
Relieve the hose assembly with flange and hose band.
Pos : 21.23 /Steuer module--------------- Seitenumbr uch --------------- @ 0\mod_1197390577023_19.doc x @ 1454 @ @ 1
112
(WR) G1/2"
(WV) M18x1.5
(PI) pilot plug 4 mm
(SL) 7-pol. plug
(eEF) blade receptable 6.3x0.8 mm
(KG) PU-hose NW4 ws
(PG1)
PU-hose NW3 sw
(ZG)
PG2)
PU-hose NW3 bl
(SG)
(WG) PU-hose NW4 gn
(E) PU-hose NW3 ge