4.4 Protective conductor connection and shield support
Protective conductor connection and shield support
The following diagram shows a typical Weidmüller shield connection clamp for the shield
Damage or faulty operation due to incorrect shielding or inadmissible cable lengths
If the correct shielding procedures or the permissible cable lengths are not observed, it can
cause damage or the machine may malfunction.
• Only use shielded cables.
• Do not exceed the cable lengths stated in the technical specifications.
Protective conductor connection M4/1.8 Nm
Shield connection terminal, Weidmüller company, type: KLBÜ CO1, order number:
Shield support and protective conductor connection of the TM150
Terminal Module 150 (TM150)
Operating Instructions, 04/2014, A5E03758735A