Software Samples 4 - Addi-Data PC104-PLUS1500 Technical Description

Standard software
9.2 Software samples
Functionality
SAMPLE01
Digital inputs
SAMPLE02
SAMPLE03
SAMPLE04
SAMPLE05
SAMPLE06
SAMPLE07
SAMPLE01
Digital outputs
SAMPLE02
SAMPLE03
SAMPLE04
SAMPLE05
SAMPLE06
SAMPLE07
SAMPLE01
Watchdog
SAMPLE05
SAMPLE01
Timer
SAMPLE02
SAMPLE01
Counter
SAMPLE02
42
Table 9-2: Supported software samples
Sample
number
Read 1 digital input
Read 2 digital inputs
Read 4 digital inputs
Read 8 digital inputs
Read 16 digital inputs
Read 32 digital inputs
Test the interrupt of all digital inputs
Test 1 digital output with/without output memory
Test 2 digital outputs with/without output memory
Test 4 digital outputs with/without output memory
Test 8 digital outputs with/without output memory
Test 16 digital outputs with/without output memory
Test 32 digital outputs with/without output memory
Test the interrupt of all digital outputs (short circuit,
ϑ
-diagnostics or V
b_ADDIDATA_GetWatchdogInformation is used. Initialise and
release the software trigger by keypress. Start 1 watchdog. Read
the status, when the watchdog has run down, reset the watchdog
and quit the program.
b_ADDIDATA_GetWatchdogInformationEx() is used.
Initialise and release the software trigger by keypress. Start 1
watchdog. Read the status, when the watchdog has run down,
reset the watchdog and quit the program.
Initialise 1 timer in mode 2 without interrupt. Start the timer
Read the timer status. The timer can be triggered by keypress.
Initialise 1 timer in mode 2 with interrupt. Start the timer. Read
the timer status. When an interrupt has been generated, stop the
timer and quit the program. The timer can be triggered by
keypress.
Initialise 1 counter without interrupt
Initialise 1 counter with interrupt
Description
- diagnostics)
cc
B B
PC104-PLUS1500