Installing The Lower Triple Clamp - KTM 250 SX 2019 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10
56
K01149-10
M01117-10

Installing the lower triple clamp

102146-10
K01150-10
Main work
–
1
Remove screw .
–
2
Remove screw .
–
Pull off the upper triple clamp with the handlebar and hang to
the side.
Info
Protect the components against damage by covering
them.
Do not kink the cables and lines.
–
3
Remove O-ring . Remove protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Slide on protective ring
–
Position the upper triple clamp with the handlebar.
–
4
Mount screw but do not tighten yet.
4
.
p. 149)
1
is correctly posi-
3
and O-ring .