Preparing Vehicle For Rides On Wet Sand - KTM 250 SX 2019 Owner's Manual

7 PREPARING FOR USE
7.5
26
M01107-01
600868-01

Preparing vehicle for rides on wet sand

M01129-01
–
Adjust the carburetor jetting and setting.
Info
Your authorized KTM workshop can recommend the
right carburetor tuning.
–
Clean the chain.
Chain cleaner ( p. 149)
–
Mount the steel sprocket.
–
Grease the chain.
Universal oil spray ( p. 150)
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
1.8 bar (26 psi)