Removing The Fork Legs; Installing The Fork Legs - KTM 250 SX 2019 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.5
11.6
54

Removing the fork legs

K01143-10
K01174-10

Installing the fork legs

H01182-10
K01174-11
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and brake line to hang tension-free to
the side.
Info
Do not activate the hand brake lever while the front
wheel is removed.
–
3
Unscrew screws . Take out the left fork leg.
–
4
Unscrew screws . Take out the right fork leg.
Main work
–
Position the fork legs.
1
Air release screw
the front.
A
Valve of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the top edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
2
Tighten screws .
Guideline
Screw, top triple
clamp
–
3
Tighten screws .
Guideline
Screw, bottom triple
clamp
p. 52)
( p. 95)
of the right fork leg is positioned to
M8 17 Nm (12.5 lbf ft)
M8 12 Nm (8.9 lbf ft)