11.7
Removing the fork protector
11.8
Installing the fork protector
11.9
Removing the lower triple clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and clamp. Mount and tighten
5
screws
.
K01143-11
Finishing work
–
Install the front wheel.
–
Remove screws
–
Remove screws
–
Remove screws
F00024-10
–
Position the fork protection on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
F00024-11
tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
SERVICE WORK ON THE CHASSIS 11
M8
25 Nm (18.4 lbf ft)
(
p. 96)
1
. Remove the clamp.
2
. Take off the left fork protector.
3
. Take off the right fork protector.
1
.
M6
10 Nm (7.4 lbf ft)
3
.
M6
10 Nm (7.4 lbf ft)
(
p. 95)
(
p. 54)
p. 60)
p. 60)
4
.
Loctite
®
243™
p. 52)
55