Housing Rotation - Emerson Rosemount 2051 Reference Manual

Reference Manual
00809-0100-4101, Rev AA
July 2008

Housing Rotation

Figure 2-10. Housing Rotation
Inline Process Connection
Do not apply torque directly to the sensor module. Rotation between the sensor module
and the process connection can damage the electronics. To avoid damage, apply torque
only to the hex-shaped process connection.
Sensor Module
Process Connection
The electronics housing can be rotated up to 180 degrees in either direction to
improve field access, or to better view the optional LCD display. To rotate the
housing, perform the following procedure:
1. Loosen the housing rotation set screw using a
2. Turn the housing left or right up to 180° from its original position. Over
rotating will damage the transmitter.
3. Retighten the housing rotation set screw.
Rosemount 2051
5
-in. hex wrench.
----- -
64
Housing Rotation Set
Screw (5/64-in.)
2-21