Quick Start Guide
4
Consider housing rotation
To improve field access to wiring or to better view the optional LCD display:
Figure 4-1: Housing Rotation
A. Housing rotation set screw (5/64-in.)
Procedure
1. Loosen the housing rotation set screw using a 5/64-in. hex wrench.
2. Rotate the housing clockwise to the desired location.
3. If the desired location cannot be achieved due to thread limit, rotate
the housing counterclockwise to the desired location (up to 360°
from thread limit).
4. Retighten the housing rotation set screw to no more than 7 in.-lb
when it reaches the desired location.
14
A
October 2019
Rosemount 3051