Using This Manual; Service Support - Emerson Rosemount 2051 Reference Manual
Pressure transmitter with 4-20 ma hart and 1-5 vdc low power protocol
Hide thumbs
Also See for Rosemount 2051:
- Reference manual (228 pages) ,
- Quick start manual (34 pages) ,
- Quick installation manual (25 pages)
Table of Contents
Advertisement
Reference Manual
00809-0100-4101, Rev AA
July 2008
Section 1
USING THIS MANUAL
SERVICE SUPPORT
www.rosemount.com
Introduction
The sections in this manual provide information on installing, operating, and
maintaining Rosemount 2051 pressure transmitters with HART
sections are organized as follows:
•
Section 2: Installation contains mechanical and electrical installation
instructions, and field upgrade options.
•
Section 3: Configuration provides instruction on commissioning and
operating Rosemount 2051 transmitters. Information on software
functions, configuration parameters, and online variables is also
included.
•
Section 4: Operation and Maintenance contains operation and
maintenance techniques.
•
Section 5: Troubleshooting provides troubleshooting techniques for
the most common operating problems.
•
Appendix A: Reference Data supplies reference and specification
data, as well as ordering information.
•
Appendix B: Approval Information contains intrinsic safety approval
information, European ATEX directive information, and
approval drawings.
•
Appendix C: Glossary
To expedite the return process outside of the United States, contact the
nearest Emerson Process Management representative.
Within the United States, call the Emerson Process Management Instrument
and Valves Response Center using the 1-800-654-RSMT (7768) toll-free
number. This center, available 24 hours a day, will assist you with any needed
information or materials.
The center will ask for product model and serial numbers, and will provide a
Return Material Authorization (RMA) number. The center will also ask for the
process material to which the product was last exposed.
Individuals who handle products exposed to a hazardous substance can avoid injury if they
are informed of and understand the hazard. If the product being returned was exposed to a
hazardous substance as defined by OSHA, a copy of the required Material Safety Data Sheet
(MSDS) for each hazardous substance identified must be included with the returned goods.
Emerson Process Management Instrument and Valves Response Center
representatives will explain the additional information and procedures
necessary to return goods exposed to hazardous substances.
Rosemount 2051
®
protocol. The
Advertisement
Table of Contents
