Emerson Rosemount 2051 Reference Manual page 118

Rosemount 2051
Special Certifications
Q4 Calibration Certificate
Q8 Material Traceability Certification per EN 10204 3.1.B
(8)
QS Prior-use certificate of FMEDA data
(11)
Q16 Surface finish certification for sanitary remote seals
QP Calibration certification and tamper evident seal
(11)
QZ Remote Seal System Performance Calculation Report
Typical Model Number:
(1) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits
apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(2) "Assemble-to" items are specified separately and require a completed model number.
(3) Not available with Low Power output code M.
OUNDATION
(4) Only valid with F
OUNDATION
(5) Not available with F
(6) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(7) Available for HART 4-20mA output code A. Valid for Ranges 1-4 only.
(8) Only available with HART 4-20mA output (output code A).
(9) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(10) Not valid with Alternate Process Connection S5.
(11) Requires S1 Diaphragm Seal Assembly code.
A-18
2051T G 3 A 2B 1
fieldbus output code F.
fieldbus output code F.
A B4 M5
Reference Manual
00809-0100-4101, Rev AA
July 2008