Rosemount 2051
LCD DISPLAY
Figure 3-5.
3-14
HART Communicator
4-20 mA Fast Keys
1-5 Vdc Fast Keys
AMS Device Manager
Right click on the device and select "Configure" from the menu.
1. In the "Basic Setup" tab, enter the damping value in the "Damp" field,
click Apply.
2. After carefully reading the warning provided, select yes.
The LCD display connects directly to the interface board which maintains
direct access to the signal terminals. The display indicates output and
abbreviated diagnostic messages. A display cover is provided to
accommodate the display.
For 4-20 mA HART output, the LCD display features a two-line display. The
first line of five characters displays the actual measured value, the second line
of six characters displays the engineering units. The LCD can also display
diagnostic messages. Refer to Figure 3-5.
For 1-5 Vdc HART Low Power output, the LCD display features a single-line
display with four characters that display the actual value. The LCD can also
display diagnostic messages. Refer to Figure 3-5.
4-20 mA HART
Reference Manual
00809-0100-4101, Rev AA
1, 3, 6
1, 3, 6
1-5 Vdc HART Low Power
July 2008