3.1
Introduction
The following procedures instruct you how to install all modules into the ITA-5831
system.
3.1.1
Installing m-SATA
ITA-5831 reserves 1 m-SATA slot on the mainboard and 3 mini-PCIe slot on the
carrier board.
1.
Loosen the handscrews and pull out dual-SSD module from the front panel.
2.
Open the top cover.
3.
Loosen the screws to remove the dual-SSD bracket. Remove the carriage
bracket for the easy-swap module.
4.
Insert the mSATA or mini-PCIe, then lock it with 2 screws.
ITA-5831 User Manual
Figure 3.1 Installing mini-PCIe and m-SATA
16