Advantech ITA-5831 Series User Manual page 43

 Console redirection:
Enable/disable console redirection function. The default settings is [disabled].
 Console Redirection Settings:
When the function of console redirection is enabled, this BIOS sub-page can be
entered. The settings specify how the host computer and the remote computer
will exchange data. Both computers should have the same or compatible set-
tings.
 Legacy Console Redirection Settings:
This sub-page shows the legacy serial port number.
4.3.1.6 CPU Configuration
This page display the information of the system's CPU.
 Hyper-threading
Enable/disable CPU hyper-threading function. The default setting is [Enabled].
 Active Processor Cores
Select the number of cores to enable in each processor package. The default
setting is [ALL].
 Intel Virtualization Technology
When enabled, a VMM can utilize the additional hardware capabilities provided
by Vanderpool Technology. The default setting is [Enabled].
 Boot performance mode
Select the performance state that the BIOS will set before OS handoff. The
default setting is [Max Non-Turbo Performance].
 Intel(R) Speed shift Technology
Enable/disable allows more than two frequency ranges to be supported. The
default setting is [Enabled].
 CPU C sates
Enable/disable CPU C states. The default setting is [Enabled].
33 ITA-5831 User Manual