Sun Microsystems Solaris 7 11/99 Hardware Platform Manual page 94

Shut down the current server before running the ab2cd command. Use the
following command to shut down the existing server:
# /usr/lib/ab2/bin/ab2admin -o stop
Stopping the AnswerBook2 Server Process
Always use ab2cd stop to stop the server running from the CD. Do not use
/etc/init.d/ab2mgr stop to stop the CD-based server.
The ab2cd stop command stops the AnswerBook2 server process and cleans up all
files in the /tmp/.ab2/ and /tmp/ab2cd_config/ directories. The
/etc/init.d/ab2mgr stop command stops all server processes, but does not
clean up the files in the /tmp/.ab2/ and /tmp/ab2cd_config/ directories.
Running Two AnswerBooks
To run two AnswerBook2 servers (one on your system, one from the CD), keep these
rules in mind:
Startup
The /etc/init.d/ab2mgr start command always starts the server on your
system.
The ab2cd command always starts the server from the CD.
Shutdown
Always use the ab2cd stop command to stop the server running from the CD.
To stop both servers, first use the ab2cd stop command to stop the server
running from the CD, then use either /etc/init.d/ab2mgr stop or
/usr/lib/ab2/bin/ab2admin -o stop to stop the server running on your
system.
82 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999