Sun Microsystems Solaris 7 11/99 Hardware Platform Manual page 178

Bringing up the domain
Installing the Computer Systems supplements packages
Configuring the Network Time Protocol (NTP) packages
Finishing the fresh install
To Configure the Domain Network Information
1. Log in to the SSP as superuser.
2. Manually edit the /etc/hosts file to include the IP address of the new domain.
You need to get the IP address from your network administrator.
The correct entries would look similar to the following /etc/hosts sample. Note
that the new entry is tacos:
129.153.49.185
127.0.0.1
129.153.49.179
129.153.49.181
129.153.49.182
129.153.49.180
129.153.49.183
129.153.49.1
110.0.0.1
110.0.0.5
The /etc/hosts file is actually a link to ./inet/hosts.
Caution – If the new domain entry follows any other host or SSP entry, the
add_install_client command may not work in Step 4 in "To Set Up the SSP" on
page 167.
166 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999
tacos
localhost
snax-ssp vegetables
snax-cb0
snax-cb1
pizza
chips
marvin-49
vegetables-priv
chips-priv
loghost