Updating The Flash Prom On The Ultra 1, Ultra 2, Ultra 450, And Sun Enterprise 450 Systems; Related Material - Sun Microsystems Solaris 7 11/99 Hardware Platform Manual

Table of Contents

Advertisement

4
C H A P T E R
Updating the Flash PROM on the
Ultra 1, Ultra 2, Ultra 450, and Sun
Enterprise 450 Systems
This chapter describes how to update the flash PROM on the Ultra™ 1, Ultra 2, Ultra
450, and the Sun™ Enterprise™ 450 systems.
Some systems require a higher level of OpenBoot™ firmware in the flash PROM to
run the 64-bit mode of the Solaris™ 7 operating environment. The OpenBoot
firmware is contained within a single flash PROM for the Ultra 1, Ultra 2, Ultra 450,
and the Sun Enterprise 450 systems.
Note – Only those systems identified in this chapter and the following chapter need
the flash PROM upgrade.
The flash PROM devices, which contain OpenBoot, are electrically erasable and
writable devices. This means that the firmware can be updated without removing
the flash PROM from the system board.

Related Material

You can also use the Flash PROM Update Multimedia Collection containing videos
of how to upgrade the flash PROM in the Ultra 1, Ultra 2, Ultra 450, and Sun
Enterprise 450 systems. This collection is located on the Flash PROM Update
Multimedia AnswerBook CD. For more information, see "Flash PROM Update
Multimedia Collection" on page 79.
59

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solaris 7 11/99 and is the answer not in the manual?

Questions and answers

Table of Contents