Sun Microsystems Solaris 7 11/99 Hardware Platform Manual page 194

To Finish the Fresh Install
1. Check the operating mode.
domain_name# isainfo -k
If you are running in 64-bit mode, you should get the following output.
sparcv9
2. Reboot the domain with the proper operating mode.
For the Solaris 7 11/99 operating environment, you can use either the 32-bit mode or
the 64-bit mode. The 64-bit mode is the default for all sun4u platforms.
a. For 32-bit mode, type the following command.
domain_name# reboot boot_alias kernel/unix
b. For 64-bit mode, type one of the following commands.
Use the ps(1) command to ensure that the edd(1M) daemon is running before you
attempt to reboot the domain.
If you are not already in 32-bit mode, use the following command.
domain_name# reboot boot_alias
If you are switching from the 32-bit mode, use the following command.
domain_name# reboot boot_alias kernel/sparcv9/unix
You are done with the fresh install unless you need to license your software, as
described in the following section.
Licensing Your Software
The Sun Enterprise 10000 domain feature requires different approaches to software
licensing when compared to systems that cannot be logically partitioned.
182 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999