Processible Working Materials; Misuse - WAGNER Cobra 40-10/2K Operating Manual

VERSION 04/2018
OPERATING MANUAL
2.4

PROCESSIBLE WORKING MATERIALS

Fluid materials like paints and lacquers.
Application
Water-dilutable products
Solvent-based lacquers and paints
Emulsions
UV lacquers
Primers
Epoxy and polyurethane lacquers, phenolic lacquers
Liquid plastics
Wax-based underside protection
Shear-sensitive lacquers
recommended
NOTICE
Abrasive working materials and pigments!
Greater wear of product-wetted parts.
Use the application-oriented model (flow rate/cycle, product, valves, etc.) as
indicated in Chapter 5.5.
Check if the fluids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.5.1.
Use suitable combinations of devices (packings, valves etc.).
Wear caused by abrasive working materials is not covered by the warranty.
Typical applications
Application
Furniture industry
Kitchen manufacturers
Joinery
Window factories
Steel-processing industry
Construction of vehicles
Shipbuilding
recommended
2.5

MISUSE

Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g., powder are processed.
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.
ORDER NUMBER DOC 2349980
limited suitability
limited suitability
Cobra 40-10 / 2K
Cobra 40-10 / 2K
not suitable
Cobra 40-10 / 2K
not suitable
9