WAGNER Cobra 40-10/2K Operating Manual page 45

High pressure double diaphragm pump for 2-component products with mixing ratio 1:1

Hide thumbs Also See for Cobra 40-10/2K:

Table of Contents

VERSION 04/2018

OPERATING MANUAL

8.2.8.3 VENT

B_05072

Procedure

1. The dismounted pump is to be place upside down on a suitable underlay and

positioned horizontally. Remove the threaded plug (5).

2. Slowly start up the pump (vent), until no more air bubbles rise from the oil suction

tube.

3. Oil level A in the oil tank has to be within the specified markings X.

4. Screw in threaded plug (5) and tighten with 2 Nm; 1.5 lbft.

5. Mount piston cover (1) and hood with casing.

6. Return pump to correct setup position.

7. Pump is ready for use again.

ORDER NUMBER DOC 2349980

Cobra 40-10 / 2K

B_04243

Table of Contents