Ventilation Of The Spray Booth - WAGNER Cobra 40-10/2K Operating Manual

VERSION 04/2018
OPERATING MANUAL
This pump can be used as part of a spraying system for Airless or AirCoat applications.
The components can be found in the accessories list, provided that the system was not
obtained as a spray pack.
The nozzles must be selected according to the spray gun instructions.
Procedure
1. Mount pump (1) on trolley (6) or wall mount.
2. For AirCoat systems (picture above): mount the additional filter pressure regulator
(7 - option).
3. Mount suction systems (5).
4. Connect the suction system's return hoses (4) to the return valves (3).
5. Connect the spray gun's high-pressure hose (2) to the static mixer (8) and, when
using the AirCoat process, connect air hose to filter pressure regulator (7).

6.5.1 VENTILATION OF THE SPRAY BOOTH

Operate the device in a spray booth approved for the working materials.
- or -
Operate the device on an appropriate spraying stand with the ventilation
(extraction) switched on.
Observe national and local regulations for the exhaust air speed.
ORDER NUMBER DOC 2349980
1
7
2 5
Cobra 40-10 / 2K
6
3
4
8
B_05079
26