HMS Anybus Communicator User Manual page 39

StoreEtnIPConfig
Note: This function cannot be used in e-mail messages.
This function stores a passed IP configuration in the configuration file "ethcfgIP.cfg".
Syntax:
<?--#exec cmd_argument="storeEtnIPConfig"-->
Include this line in a HTML page and pass a form with new IP settings to it.
Accepted fields in form:
SetIp
SetSubnet
SetGateway
SetEmailServer
SetDhcpState - value "on" or "off"
SetDNS1
SetDNS2
SetHostName
SetDomainName
SetSMTPUser
SetSMTPPswd
Default output:
Invalid IP address!
Invalid Subnet mask!
Invalid Gateway address!
Invalid IP address or Subnet mask!
Invalid Email Server IP address!
Invalid DHCP state!
Invalid DNS1!
Invalid DNS2!
Configuration stored correctly.
Failed to store configuration.
GetText
Note: This function cannot be used in e-mail messages.
This function retrieves a text string from an object and stores it in the Output Data area.
Syntax:
<?--#exec cmd_argument="GetText( 'ObjName', OutWriteString ( offset ), n )"-->
ObjName- Name of object.
offset - Specifies the destination offset from the beginning of the Output Data area.
n
Default output:
Success
Failure
Anybus Communicator PROFINET User Manual
- Specifies maximum number of characters to read (Optional)
- Write succeeded
- Write failed
Server Side Include (SSI) 39
Doc: HMSI-27-309, Rev. 3.11