HMS Anybus Communicator User Manual page 37

DisplayDNS1
This function returns the address of the primary DNS server.
Syntax:
<?--#exec cmd_argument="DisplayDNS1"-->
DisplayDNS2
This function returns the address of the secondary DNS server.
Syntax:
<?--#exec cmd_argument="DisplayDNS2"-->
DisplayHostName
This function returns the hostname.
Syntax:
<?--#exec cmd_argument="DisplayHostName"-->
DisplayDomainName
This function returns the default domain name.
Syntax:
<?--#exec cmd_argument="DisplayDomainName"-->
DisplayDhcpState
This function returns whether DHCP/BootP is enabled or disabled.
Syntax:
<?--#exec cmd_argument="DisplayDhcpState( 'Output when ON', 'Output when OFF'
)"-->
DisplayDhcpSupport
This function returns "Arg1" if DHCP is supported, and "Arg2" if it is not.
Syntax:
<?--#exec cmd_argument="DisplayDhcpSupport( 'Arg1', 'Arg2' )"-->
DisplayEmailServer
This function returns the currently used SMTP server address.
Syntax:
<?--#exec cmd_argument="DisplayEmailServer"-->
Anybus Communicator PROFINET User Manual
Server Side Include (SSI) 37
Doc: HMSI-27-309, Rev. 3.11