Cellular; Zigbee; Communication Connector - SolarEdge SE3000H-US Installation Manual

Cellular

This wireless communication option ( purchased separately) enables using a cellular
connection to connect one or several devices (depending on the data plan used) to the
monitoring platform.
The GSM Plug-in is provided with a user manual, which should be reviewed prior to
connection. Refer to https://www.solaredge.com/sites/default/files/cellular_gsm_
installation_guide.pdf

ZigBee

This option enables wireless connection of one or several devices to a Z igBee Gateway,
for wireless communication to the monitoring platform.
The Z igBee Gateway is provided with an installation guide, which should be reviewed
prior to connection. Refer to https://www.solaredge.com/sites/default/files/se-zigbee-
home-gateway-installation-guide.pdf.

Communication Connector

A communication gland with multiple openings is used for connection of the various communication
options. The table below describes the functionality of each gland opening. U nused openings should
remain sealed.
Opening for cable size (diameter)
2.5 - 5 mm
4.5 - 7 mm, with cut
2 - 4 mm, with cut
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
Figure 21: Communication Gland
Chapter 6: Setting Up Communication
Connection type
RS485
Ethernet (CAT5/6)
ZigBee, CDMA or GSM antenna cable
53