Chapter 5: Configuring The Inverter; Lcd Buttons - SolarEdge SE3000H-US Installation Manual

Chapter 5: Configuring the Inverter

Chapter 5: Configuring the Inverter
This chapter describes the interfaces to use for inverter configuration, and the configuration procedures.

LCD Buttons

Use the f our buttons located beneath the LCD panel for controlling the LCD menus, setting the inverter
configuration, and moving between the inverter status screens.
To use the LCD buttons when the inverter cover is removed, touch the white dots on the LCD button
frame.
Use the four user buttons to control the LCD panel menus:
Esc: Moves the cursor (>) to the beginning of the currently displayed parameter; goes to the previous
l
menu, and cancels a value change with a long press (until Aborted is displayed).
Up (1) and Down (2): Moves the cursor from one menu option to another, moves among the
l
characters of a displayed parameter, and toggles between possible characters when setting a value.
OK/Enter (3): Selects a menu option and accepts a value change with a long press (until Applied is
l
displayed).
Use the three rightmost buttons Up, Down and OK sequentially for entering the Setup mode.
The LCD screen displays status information of the system and various menus for configuration options.
The LCD panel and buttons are used during the following processes:
Operational mode: The LCD panel allows checking for proper system o peration. Refer to Status
l
Screens - Operational Mode on page 45 for a description of this option. Use the up and down buttons
to toggle through the informative displays.
Setup mode: Upon installation, an installer may perform basic configuration , as described in Inverter
l
Configuration – Setup Mode on page 39.
Error messages: In the event of a problem, an error message may be displayed on the LCD panel.
l
For more information, refer to Errors and Troubleshooting on page 62 and Inverter C onfiguration – Setup
Mode on page 39.
38
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
Figure 20: LCD buttons