SolarEdge SE3000H-US Installation Manual page 65

Error Codes
Code
CPU
v3.18xx CPU v3.19xx
and and above
below
44 3xB
45 3x2
48 3xF
176 3x6A
178 3x6D
185 3x6E
193 3x6A
169 18xA9
166-168, 18xA6-A8 ,
170 18xAA
171 18xAB
12 18xC
13 18xD
55 18x37
64
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
Error
Message
No Country
Select the country as described in Country and Grid on page 41
Selected
Inv. Comm. No communication with the digital board. Contact SolarEdge
Error support.
SW Error Contact SolarEdge support.
For info
contact your Inverter remotely locked. Contact your installer.
installer
Check:
Internal RGM
The wiring of the meter CTs
l
Error
Connections to the inverter communication board.
l
Refer to the meter troubleshooting in
Meter Comm.
Error
http://www.solaredge.com/files/pdfs/solared
ge-meter-installation-guide-na.pdf
OFF/ON to
Turn the ON/OFF switch to ON to initiate production.
Reconnect
RCD Sensor Error. Contact SolarEdge support.
HW error Contact SolarEdge support.
Over voltage Over voltage in DC input of the inverter. Check the strings'
Vin voltage.
Refer to
ARC_
DETECTED
https://www.solaredge.com/sites/default/fil
es/arc_fault_detection_application_note_na.pdf.
ARC_PWR_
DETECT
AC voltage too high
Verify that the inverter is set to the correct country.
o
V-Line Max
Turn OFF the inverters in the site and verify AC grid
o
voltage.
Troubleshooting