Cellular Status
If a cellular (CDMA) Plug-in is connected, this screen replaces the Server status screen:
S e r v e r : C e l l
S t a t u s :
M N O :
< X X X X X X >
< E r r o r
Server: The method of communication to the SolarEdge monitoring platform. Should display Cell.
l
Status: Displays OK if the inverter established a successful physical connection to the Cellular Plug-in.
l
S_OK: The last communication to the SolarEdge monitoring platform was successful (appears if the
l
inverter is connected to the platform).
Sig: The signal strength, received from the Cellular Plug-in. A value between 0-5, (0 = no signal, 5 =
l
excellent signal).
Error message per communication connection status failure
l
GSM Status
If a GSM Plug-in is connected, this screen replaces the Server status screen:
S e r v e r : C e l l
S t a t u s :
M N O :
< x x x x x x x >
< E r r o r
Server: The method of communication to the SolarEdge monitoring platform. Should display Cell.
l
Status: Displays OK if the inverter established a successful physical connection to the modem.
l
S_OK: The last communication to the SolarEdge monitoring platform was successful (appears if the
l
inverter is connected to the platform). If S_OK is not displayed, refer to Status Screens - Operational
Mode on page 45.
MNO: The mobile network operator name
l
Sig: The signal strength, received from the modem. A value between 0-5, (0 = no signal;
l
5 = excellent signal)
Error message: per communication connection status failure
l
Communication Ports Status
R S 4 8 5 - 1 < S E > < S
Z i g B e e
##: The total number of slaves detected on the specific port
l
Dev: The type of device that was configured to a specific port (based on the port's functionality), as
l
follows:
SE: SolarEdge device (default)
o
LGR: Non-SolarEdge logger
o
MLT: Multiple devices, such as meters and batteries
o
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00306-1.1
< S _ O K >
< O K >
S i g : 5
m e s s a g e >
< S _ O K >
< O K >
S i g : 5
m e s s a g e >
D e v
P r o t
# #
>
< - - >
< S E > < M P S > < - - >
Chapter 5: Configuring the Inverter
49