Zigbee Status; Cellular Status; Gsm Status - SolarEdge StorEdge SE7600A-US1 Installation Manual

ZigBee Status

ZigBee Status
This screen describes the ZigBee configuration:
P A N : X X X X X
C H : X X / X X X X
M I D : X X X X
RSSI: The receive signal strength indication of the closest ZigBee in the system. L = low, M = medium, H
l
= high and (-) = no signal.
PAN ID: The ZigBee transceiver PAN ID (Personal Area Network Identification), the ID uniquely
l
represents a device in a Zigbee network.
Ch.: The ZigBee transceiver channel
l
ID: The ZigBee transceiver ID
l
MID: The Master ID of the coordinator (master) ZigBee card. This field is shown only in devices with
l
router (slave) ZigBee cards, and after a successful ZigBee association. If a ZigBee card is not connected,
a No ZigBee message is displayed instead of the MID field.

Cellular Status

If a cellular (CDMA) modem is connected, this screen replaces the Server status screen:
S e r v e r : C e l l
S t a t u s :
M N O :
< E r r o r
Server: The method of communication to the SolarEdge monitoring platform. Should display Cell.
l
Status: Displays OK if the inverter established a successful physical connection to the Cellular modem.
l
S_OK: The last communication to the SolarEdge monitoring platform was successful (appears if the
l
inverter is connected to the platform).
Sig: The signal strength, received from the cellular modem. A value between 0-5, (0 = no signal, 5 =
l
excellent signal).
Error message per communication connection status failure
l
GSM Status
If a GSM modem is connected, this screen replaces the Server status screen:
S e r v e r : C e l l
S t a t u s :
M N O : < x x x x x x x >
< E r r o r
Server: The method of communication to the SolarEdge monitoring platform. Should display Cell.
l
Status: Displays OK if the inverter established a successful physical connection to the modem.
l
S_OK: The last communication to the SolarEdge monitoring platform was successful (appears if the
l
inverter is connected to the platform). If S_OK is not displayed, refer to Status Screens - Operational
Mode on page 65.
MNO: The mobile network operator name
l
Sig: The signal strength, received from the modem. A value between 0-5, (0 = no signal;
l
5 = excellent signal)
Error message: per communication connection status failure
l
68
R S S I : < L >
X X
< S _ O K >
< O K > S i g : 5
m e s s a g e >
< S _ O K >
< O K >
S i g : 5
m e s s a g e >
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3