Σ-7C - YASKAWA SERVOPACK Sigma 7W Series Product Manual

No.
17 Rotary Switches (S1 and S2) Used to set the MECHATROLINK station address.
PWR
18
L1, L2
19
CN
20
Analog Monitor Connector
21
(CN5)
Panel Display for Axis A
22
Panel Display for Axis B
23
Safety Connector (CN8)
24
Σ -7C
1.3.2
Main circuit terminal
(on ide of ERVOPACK)
Motor terminal
No.

Front Cover

Input Voltage

Nameplate

Model

QR Code

CHARGE

Main Circuit Terminals
Name
Lights when the control power is being supplied.
Lights during MECHATROLINK communications.
Lights when the SERVOPACK normally receives a CON-
NECT command.
You can use a special cable (peripheral device) to monitor
the motor speed, torque reference, or other values.
Displays the servo status with a seven-segment display.
Connects to a safety function device.
Name
Indicates the SERVOPACK model and ratings.
The model of the SERVOPACK.
The QR code that is used by the MechatroCloud service.
Lit while the main circuit power is being supplied.
Note: Even if you turn OFF the main circuit power supply, this indi-
cator will be lit as long as the internal capacitor remains
charged. Do not touch the main circuit or motor terminals
while this indicator is lit. Doing so may result in electric
shock.
The terminals depend on the main circuit power supply
input specifications of the SERVOPACK.
Continued from previous page.
Description
ERVOPACK with the Front Cover Open
17 17
18 18 19 19
11 11
With the Front Cover Open
12 12
1 1
2 2
14 14
15 15
16 16
Bottom of the ERVOPACK
26 26
Description
–
–
Continued on next page.
1.3 Part Names
1.3.2 Σ-7C
Reference
–
–
–
–
–
page 4-8
20 20
21 21
22 22
24 24
25 25
1
Reference
–
–
–
–
–
–
–
1-5