Advertisement
Diesel particle filter regeneration
When the tractor is operated, the diesel particulate filter is fouled with solid particles during the fuel
combustion while the engine is running.
The full filter of solid particles is automatically regenerated (cleaned) while the engine is running by increased
temperature of exhaust gases.
The regeneration of the filter of solid particles DPF being performed is indicated by the flashing green signal
lamp of sufficient temperature in the exhaust manifold.
ATTENTION: During regeneration of the filter of solid particles DPF the temperature of exhaust
gases and of the surface of the filter of solid particles is increased substantially. There is an
increased risk of fire or explosion during operation of the tractor in an environment with risk of fire
or in an explosive environment.
During operation of the tractor in an environment with risk of fire or in an explosive environment when
regenerating the filter of solid particles DPF it is necessary to leave this environment with the tractor
immediately or interrupt the regeneration of the filter of solid particles DPF in the menu of the instrument
panel.
More information in chapters Instrument Panel and System of Additional Treatment of Exhaust Gases.
During operation of the tractors with the engine equipped with the filter of solid particles avoid
long-term operation at idling or at low engine load.
Reversing lever
The selection of the direction of travel drive is done by
reversing lever (forward, backward).
F - driving forward
N - neutral
R - driving backward
The lever also serves for starting the tractor without the
depressed clutch pedal.
DRIVING OPERATION
P18N059
91
X212a
Advertisement
