Advertisement
Limitation of the upper position of the three-point hitch
It is activated with the control (5). The limitation can be
implemented in the upper half of the three-point hitch lift.
Lowering speed
The lowering speed of the three-point hitch is set with the
control (3).
Symbol of the maximum
lowering speed
Symbol of the minimum
lowering speed
In the vibration dampening mode and during
the use of the rear control buttons the lowering speed
setting is out of function.
Free position
For permanent work with free hydraulic system, e.g.
during work with a plough with a support wheel the
position of the control (4) under the indication (A) and the
position of the control (6) at the positional control symbol
is used.
Setting the control of three-point hitch
Electrohydraulics enables two ways of three-point hitch
control.
A. Manual control setting - control (6) is set in the range
see arrow
B. Automatic control - control (6) is set in HitchTronic
(AHC) position see arrow
Automatic control can be at any time exchanged for
manual and the other way round by a control (6).
ELECTRO-HYDRAULIC SYSTEM
142
F_02_169
F_02_170
F_02_171
ahc_01
Advertisement
