Advertisement
Coupling of a single-axle trailer
When the drawbar eye of the trailer is installed on the hitch hook, it is hydraulically lifted together with the
trailer eye to the position where the bearing hooks snap under the pins of the hitch carrier.
The hydraulic lifting arms must then be lowered so that the carrier pins can make contact with the bearing
hooks - the telescopic pull rods must not be stretched.
Maximum permissible vertical static load of hitches for trailers and semi-trailers
Hitch type
Allowed
vertical
static load
2 000 kg
CBM GTF30015
2 000 kg
CBM Y314SL
736 kg
CBM GTB30003
CBM GTU001
2500kg
DROMONE ZC-H 3000kg
Fixed pin
2000 kg
CBM GTP001
The maximum weight of the aggregated braked trailer or semi-trailer must not exceed the
value specified on the tractor data plate and the value specified in the vehicle registration book. The
maximum allowed speed of the combination of vehicles is connected with the maximum allowed
speed of the slower vehicle of the combination.
Hitch GTB30003 max. trailer weight 6 000 kg
Hitch Y314SL max. trailer weight 14 000 kg
Hitch GTP001 max. trailer weight 20 000 kg
Hitch DROMONE ZC-H max. trailer weight 24 000 kg
TRANSPORTATION
Ø of
Hitch type
hitch pin
31 mm
CBM GTF30014
43 mm
31 mm
CBM GTS80001
47 mm
CBM GTB30030
DROMONE ZC-D 1100kg
44,5
mm
CBM GTS80003
118
Allowed
Ø of
vertical
hitch pin
static load
2 000 kg
38 mm
2500 kg
80 mm
31 mm
1800kg
2000kg
80mm
Advertisement
