Advertisement
PREVENTIVE DAILY MAINTENANCE
Hitches
Check the condition of the hitching and attachment
systems of the tractor and trailer.
F18
Inspection of fouling of coolers
Open the front cowl and check the plates of the engine radiator of engine cooling liquid and air conditioning
condenser, the cooler of oil of the front PTO shaft and the cooler of the gear oil (if the tractor is equipped with
them) for fouling.
In case of fouling clean the cooler plates with pressure air.
After work with front implements and in case of cooler clogging
After work with front implements:
- Check the connections of the external hydraulic circuit of
the control of the front three-point hitch for leaks
Clogging of the coolers:
- Release and slide the cooler to the left side of the tractor.
- Clean the front walls of the engine (gearbox, air-
conditioning condenser) cooler with compressed air (blow
air in the direction from the engine).
- Remove residual dirt from the space under the hood so
that it should not be suctioned again.
F_02_100
Tyres and wheels
Check the air pressure in the front and rear tyres.
Depending on the character of work adjust the pressure to
the recommended value. Check and if necessary retighten
the bolts of the front and rear wheels.
Never drive with loose wheel bolts!
F11006
25
Advertisement
