Warning signalization of hydrostatic steering failure
Hydrostatic steering pump failure is with oil pressure drop
under 120 kPa behind a pump signalized on a dashboard
by an applicable symbol.
Note: When starting the tractor or with low engine
revolutions, the control may blink, if it switches off after
starting or increasing the revolutions, it is not a failure.
Important warnings
In case that indicator of lubrication, battery recharge or
a fault of the hydrostatic steering is on during normal
operation of the tractor, stop the tractor immediately, stop
the engine and contact a specialised repair shop. This
prevents a serious damage or breakdown of the tractor.
Limiting travel speed
With the threat of exceeding the travel speed of
40 km/h, the maximum engine revolutions are
automatically reduced. This function cannot be
switched off.
DRIVING OPERATION
112
P18N069
F18N040
FHD14N068