Advertisement
INSTRUMENT PANEL
Service menu
The service menu contains these items:
Display settings - setting of the display backlight
Failure history - contains listing of errors according to individual tractor nodes
Performance monitor - allows monitoring of the processed area (only when the tractor is equipped with
electro-hydraulics)
Calibration - enables setting of display of revolutions of the rear PTO shaft, calibration of travel speed, reset
of the service interval
Engine setup - enables setting of blocking of DPF filter baking
Language - enables setting of language mutation of the menu
Display - indicator of service inspection intervals
P18N070
The warning regarding an approaching maintenance date (service interval) is displayed if there are less than
25 operating hours remaining to the planned maintenance.
The maintenance symbol (1) is shown on the display of the instrument panel.
When the key in the switch box is moved from the position 0 to the position I, the main screen appears on
the display and after several seconds the warning regarding an approaching maintenance (B) with the
number of operating hours of the tractor (2) remaining to the maintenance date are displayed on the display.
Exceeding the service interval
In case of exceeding the service interval, the maintenance
alert (1) with the number of operating hours 0 is displayed
on the display when the key in the switch box is moved
from the position 0 to the position I.
P18N071
58
Advertisement
