Advertisement
Adjusting the lowering rate of the front three-point hitch
Before the start of work with an implement attached to the
front three-point hitch it is recommended to adjust the time
necessary to lower the implement from the highest to the
lowest position to 1 - 1.5 s by setting the throttle valve. By
turning the valve body to the left (in the arrow direction)
you will increase the lowering speed. During the
adjustment the valve levers of the front hitch must be
directed horizontally.
Hydraulic lock of the front three-point hitch
Hydraulic locking of the front three-point hitch is performed
in any position of the hydraulic cylinders with the ball valve
in the front part of the tractor (2).
A
Free position
Valve levers are in the horizontal position
- The hitch can be controlled from the cabin
B
Locked position
Valve levers are in the vertical position
- The hitch is locked
Working and transport position of the front three-point hitch
A
Working position of the front
three-point hitch
B
Transport position of the front
three-point hitch
Changing the position of the draw-bars of the front three-
point hitch:
1. Release and remove the pin (1) from the opening.
2. Lift the arm from position (A) to position (B).
3. Lock the arm by inserting the pin (2) in the opening (2)
and secure the pin.
Only insert the pin in the openings, never check
whether the opening is free with your fingers!
Driving with agricultural machines attached to the front three-point hitch
The maximum permissible speed of the tractor
with agricultural machines attached to the front three-
-1
point hitch is 15 km.h
attached to the front three-point hitch, we recommend
you to lift the lower lifting draw-bars to the transport
position.
. If no implement or weight is
HITCHES
151
X463
X464
E466
FH12N066
Advertisement
