Description Of The Interfaces And Functions - Siemens SIMODRIVE 611 Planning Manual

05.01
9.2.2

Description of the interfaces and functions

Table 9-1 Overview, infeed modules, internal cooling, commutating reactors, line filter, fuse
Power [KW) Order number
S1/S6/S
max
5/6.5/10 UI 6SN1146–1AB0j–
0BA1
10/13/25 UI 6SN1145–1AA0j–
0AA1
28/36/50 UI 6SN1145–1AA0j–
0CA0
16/21/35 I/R 6SN1145–1BA0j–
0BA1
36/47/70 I/R 6SN1145–1BA0j–
0CA1
55/71/91 I/R 6SN1145–1BA0j–
0DA1
80/104/131 I/R 6SN1145–1BB0j–
0EA1
120/156/175 I/R 6SN1145–1BB0j–
0FA1
Note:
1) The line filter does not include the commutating reactor! This must be additionally mounted between the line
filter and I/R !
The line filter package comprises a commutating reactor and a line filter, which are separately
combined to form a package.
2) Commutating reactor included in the NE module.
3) Versions NH, D, DO, gL
Switch S1
Switch S1 is provided on the upper side of the NE and monitoring module and
at the front of the UI module 5 kW. It is used to select various functions, refer to
Section 6.1.
Terminal 19
FR–
Reference potential for the enable voltage, terminal 9,
floating (connected to the general reference ground terminal 15 via 10 kΩ).
It is not permissible that terminal 19 is connected to terminal 15! (Connect to the
PE rail or X131).
When controlling the enable signals via P–switching electronic outputs (PLC),
terminal 19 should be connected to the 0 V reference potential (ground) of the
external power supply.
The circuit/source must correspond to the requirements of PELV (Protection
Extra Low Voltage) function extra low voltage with protective separation in com-
pliance with EN 60204–1; 6.4.
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
Commutating Line filter 1)
reactor only 415 V !
6SN1111–0AA01–
2) –
1BA0
6SN1111–0AA01–
2) –
1AA0
6SN1111–1AA00– 6SN1111–0AA01–
0CA0 1CA0
6SN1111–0AA00– 6SN1111–0AA01–
0BAj 2BAj
6SN1111–0AA00– 6SN1111–0AA01–
0CAj 2CAj
6SN1111–0AA00– 6SN1111–0AA01–
0DAj 2DAj
6SN1111–0AA00– 6SN1111–0AA01–
1EAj 2EAj
6SN1111–0AA00– 6SN1111–0AA01–
1FAj 2FAj
9 Important Circuit Information
9.2 Infeed modules
Line filter Fuse 3) [A]
package
only 415 V !
– 16
– 25
– 80
6SN1111–0AA01–
35
2BB0
6SN1111–0AA01–
80
2CB0
6SN1111–0AA01–
125
2DB0
6SN1111–0AA01–
160
2EB0
6SN1111–0AA01–
250
2FB0
9
9-223