Wise-S672 I/O Module - Advantech WISE-4610 Series User Manual

 Burn-out Detection Yes (4~20mA only)
 Supports Data Scaling and Averaging
4.5.2

WISE-S672 I/O Module

4.5.2.1 Digital Inputs
 Channels: 6
 Logic level (dry contact)
– 0: Open
– 1: Close DI COM
Non-isolation

 Supports 32-bit counter input function (maximum signal frequency, 200 Hz)
 Supports keep/discard counter value on power-off
 Supports frequency input function (maximum signal frequency, 200 Hz)
 Supports inverted digital input status
4.5.2.2 COM Port #1
 Port type: RS-485
 Baud Rate (bps): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
 Data Bits:7, 8
 Stop Bits: 1, 2
 Parity: None, Odd, Even
 Flow Control: Auto flow control
 Signals: DATA+ and DATA-
Protection: 15 kV ESD

Supported Protocol:

– Modbus/RTU (Total 32 address by max. 8 instructions)
4.5.2.3 COM Port #2
 Port type: RS-485 or RS-232
 Baud Rate (bps): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
 Data Bits:7, 8
 Stop Bits: 1, 2
Parity: None, Odd, Even

Flow Control: Auto flow control (RS-485 only)

 Signals: DATA+ and DATA-
 Protection: 15 kV ESD
 Supported Protocol:
– Modbus/RTU (Total 32 address by max. 8 instructions)
21 WISE-4610 User Manual