Membrane Button - Advantech WISE-4610 Series User Manual

5.1.7

Membrane Button

Please see LED Behavior for membrane button functionality.
In "Line power only or Line power and battery"Mode

When WISE-4610 is powered up via Line Power:
1. The LED indicators are disabled in default.
2. Accordingly, push the Membrane Button again for battery level indication.
3. After the above, push the button again, the LED indicators will be disabled again
and back to state 1.
4. If remove the Line power and powered WISE-4610 by battery, the module will
enter into "Battery power only" mode.
 In "Battery power only" Mode
1. Status/Error/Rx/Tx/COM LED are working in 15 seconds and the LED indicators
are disabled in default.
2. In state 1, all LED indicators will go off after 15 seconds for power saving.
3. In state 1, when push the Membrane Button, all LED indicators will be enabled
including the four signal indicators for battery level. All indicators will go off
again after 15 seconds.
4. In state 3, push the button again to turn off all LEDs.
5. When all LEDs are off, push the Membrane Button again to back into state 1.
6. When the module is line powered, WISE-4610 will enter into "Line Power Only
or Line power and Battery" Mode.
WISE-4610 User Manual 38