Usb Vcom And Restful - Advantech WISE-4610 Series User Manual

 Battery Events
Events
Low voltage
Over-Temperature in Charge condi-
tion is detected.
Over-Temperature in Discharge
condition is detected.
Internal Short is detected.
Full-charged condition reached
Battery temperature and charging

Battery Temp. T (°C)
1 T < 0
≤ ≤
2 0 T
3 45 < T
4 T > 60
5.1.5

USB VCOM and RESTful

5.1.5.1 General Description
GET
The GET method means retreive whatever information (in the form of an entity) is
identified by the Request-URI. If the Request-URI refers to a data-producing process,
it is the produced data which shall be returned as the entity in the response and not
the source text of the process, unless that text happens to be the output of the pro-
cess.
PUT
PUT can be used when the client is sending data to the the server and the client is
determining the URI for the newly created resource.
The PUT method requests that the enclosed entity be stored under the supplied
Request-URI. If the Request-URI refers to an already existing resource, the enclosed
entity SHOULD be considered as a modified version of the one residing on the origin
server. If the Request-URI does not point to an existing resource, and that URI is
capable of being defined as a new resource by the requesting user agent, the origin
server can create the resource with that URI.
client must supply the ID
if the resource exists, *replace* it with the inbound data
if it doesn't exist, create a new one (assuming you can do that)
WISE-4610 User Manual
Condition
Remaining battery capacity <=
20%
battery temperature < 0°C or >
60°C
OTD flag of Operating Sta-
tuses set
ISD flag of Operating Statuses
set
FC flag of Operating Statuses
set
Battery Level %
-
45 -
> 10 %
≤
60
≤
-
Charging
Stop charging
Allow charging
Stop charging
10 % Charge to 20% only
Stop charging
36
Error LED
(Slow Blink)
V
V