Advantech WISE-4610 Series User Manual page 59

Communication Box
In this box, there are several communication interfaces for configuring different WISE
modules. The WISE-4610 series uses the USB-serial interface for configuration.
Refresh: Pressing this button refreshes the USB-serial interface.
USB-Serial: This block is for connecting to a WISE module via USB. The available
USB-serial port number will be shown here. Click Go to Configuration to connect
the USB COM port.
USB-Serial Configuration Page
After Go to Configuration is clicked, all available USB COM ports will be displayed.
Choose the COM port that you are going to configure and click Connect to open the
Configuration page. You can further click Open in Browser to use your default
browser to configure the WISE module (IE is the default browser embedded in WISE
Studio).
6.1.2.4 Information Page
Module Information
This page displays the name of the module and related information. Click Go to Con-
figuration to view or change the settings:
Model Name: Model of the WISE module.
Customized Name/UUID: Refer to the model name and UUID of the module.
The default UUID is a combination of the model name and IMEI. You can modify
this value.
Location Information: Information on the location of the module is given here.
Description: Any comments describing this module can be given here.
49 WISE-4610 User Manual