Modbus Configuration - Common Settings Tab
In this tab, you can configure the parameters of the RS-485 port.
Baud Rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Data Bit: 7, 8
Stop Bit: 1, 2
Parity: None, Odd, Even
Slave Response Timeout: For setting the time for Modbus slaves to reply
Delay between Polls: For setting the delay time between each Modbus instruc-
tion
CRC Check: For disabling the CRC check to ignore Modbus CRC errors
57
WISE-4610 User Manual