Like all WISE-4000 series modules, WISE-4610 series of wireless sensor nodes is
designed as compact units. Applicable installation methods are briefly described in
the following sections.
3.1
Modularization
The purpose of modularization is to better leverage the same wireless board with dif-
ferent I/O combination flexibly. The design is for the two modules installed with a
board to board connector, there are six screws to fix the enclosure after the two
boards are connected.
Figure 3.1 Install the I/O module with wireless module
Note!
The screw torque is recommend to be 2.5~3.0 kgf/cm
WISE-4610 User Manual
10
2